Avenli SPAs

If water leaks from the pump's connection of inlet and outlet, what can I do?
Problem Your spa has a water leak at the connectors. Solution In the Repair Kit, 2x O-rings are included to seal the connectors. As you can see ...
Fri, 7 May, 2021 at 2:28 PM
The screen displays the error code "CHG FIL"
We ask that you hold the filter button down for 10-15 seconds to rest the filtration setting. This should solve your issue. If not , please follow steps bel...
Fri, 7 May, 2021 at 3:51 PM
The screen displays the error code E1, E3, E4, E5, E6
If the screen displays an error code “Ex”, please refer to the solution below. Code E1 Situation: Not heating Not heating properly. Problem: Wrong tem...
Fri, 7 May, 2021 at 3:47 PM
Your spa does not filter properly, or not enough
Problem Your spa does not filter properly, or not enough.   Origin Poor circulation of water in the pump of filtration.    Solution Check that the wat...
Mon, 26 Apr, 2021 at 10:33 AM
You can’t find the filter cartridges and cartridge support in the packaging
Problem You can’t find the filter cartridges and cartridge support in the packaging. Origin They are located at the rear of the engine block. Solution Y...
Mon, 26 Apr, 2021 at 10:29 AM
Your spa doesn’t heat up or not enough
Problem Your spa doesn’t heat up or not enough.    Origin Poor water circulation in the filtration pump.    Solution Check that the water line in the p...
Wed, 28 Apr, 2021 at 3:50 PM
Your motor unit makes unusual noise
Problem Your motor unit makes unusual noise.    Origin Poor water circulation in the filtration pump. Solution Check that the water line in the pool ...
Mon, 26 Apr, 2021 at 10:35 AM
Your inflatable spa liner has an air leak(or water leak )
Problem Your inflatable spa liner has an air leak(or water leak ). Solution Little holes or puncture can be repaired with the repair kit included and ...
Mon, 26 Apr, 2021 at 10:25 AM
You find your spa water dirty.
Problem  You find your spa water dirty. Origin  This usually comes from a chemical mistreatment of the water in the Spa. Solution  - Filtration cartr...
Mon, 26 Apr, 2021 at 10:40 AM
You can’t adjust the temperature to a maximum of 42°C on your spa
Problem You can’t adjust the temperature to a maximum of 42°C on your spa. Origin The maximum temperature is set in the factory to 38 or 40°C. Soluti...
Mon, 26 Apr, 2021 at 10:39 AM